Ob lub ntsiab lus polyamide adduct kho, siab tawv, siab tsim epoxy xim nrog zoo ua haujlwm rau dej, roj, tshuaj, thiab kev cuam tshuam thiab kev puas tsuaj.
Nta
1.Excellent dej tsis kam thiab xeb kuj.
2.Zoo tshuaj tsis kam thiab roj kuj.
3.Good adhesion, cuam tshuam tsis kam, hnav tsis kam
Pom zoo siv
Rau cov hlau thiab pob zeb tiv thaiv nyob rau hauv ib puag ncig corrosive hnyav, tuaj yeem siv los ua lub tsho nruab nrab lossis ua lub tsho sab saum toj rau cov qauv sab hauv.
Cov lus qhia siv
Substrate thiab kho qhov chaw
Steel:moj tej tawg huv si rau Sa2.5 (ISO8501-1) los yog yam tsawg kawg nkaus SSPC SP-6, blasting profile Rz50μm ~ 100μm (ISO8503-1) los yog fais fab cuab yeej ntxuav kom tsawg kawg nkaus ISO-St3.0/SSPC SP3
Txhua qhov chaw yuav tsum tau coated yuav tsum huv si, qhuav thiab tsis muaj av, thiab yuav tsum tau soj ntsuam thiab kho raws li ISO8504.
Pre-coated rhiav primer:Welds, foob pob hluav taws calibration thiab kev puas tsuaj yuav tsum tau blasting ntxuav rau Sa2.5 (ISO8501-1), los yog lub hwj chim cuab yeej ntxuav rau St3.0.
Taw up:Ua tib zoo tshem cov roj ntawm qhov chaw thiab ntxuav cov ntsev thiab lwm yam av.
Concrete nto:Txhawm rau siv lub sealer tsim nyog los kaw qhov pores saum npoo ua ntej thov.
Olawv nto:thov sab laj ZINDN.
Siv tau thiab kho
● Ambient ib puag ncig kub yuav tsum yog los ntawm rho tawm 5 ℃ mus rau 38 ℃, tus txheeb ze cov av noo yuav tsum tsis txhob ntau tshaj 85%.
● Substrate kub thaum lub sij hawm thov thiab kho yuav tsum yog 3 ℃ saum toj dew point.
● Kev thov sab nraum zoov yog txwv tsis pub nyob rau hauv huab cua hnyav xws li nag, pos huab, daus, cua muaj zog thiab plua plav hnyav.
lauj kaub lub neej
| 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 4 hnu | 3 hnu | 2 hnu | 1.5h ib |
Txoj kev thov
Airless tsuag, cua tsuag tsis pom zoo.
Txhuam thiab cov menyuam txheej tsuas yog pom zoo rau cov kab txaij, me me txheej txheej lossis kho.
Daim ntawv thov tsis
| Txoj kev thov | Chav tsev | Airless tsuag | Txhuam / Roller |
| Nozzle lub cev | mm | 0.43-0.53 Nws | —— |
| Nozzle siab | kg/cm2 | 150-200 Nws | —— |
| Nyias | % | 0 ~ 10 | 5 ~ 10 |
Qhuav & Curing
| Substrate nto kub | 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| Nto-qhuav | 16 hnu. | 8 hnu. | 4 hnu. | 2 hnu. |
| Los ntawm qhuav | 48h ib. | 24 teev. | 12 hnu. | 6 hnu. |
| Kho tag nrho | 14 hnub | 10 hnub | 6 hnub | 4 hnub |
| Recoating ncua sij hawm (Min.) | 48h ib | 24 teev. | 12 hnu. | 6 hnu. |
| Recoating ncua sij hawm (Max.) (no.2 txheej) | 14 hnub | 10 hnub | 6 hnub | 4 hnub |
| Recoating ncua sij hawm (Max.) (Topcoat) | 30 hnub | 20 hnub | 14 hnub | 7 noj |
Preceding & Consequent txheej
Lub tsho ua ntej:Epoxy zinc phosphate, Epoxy zinc nplua nuj, Epoxy primer, nws tseem tuaj yeem siv ncaj qha rau ntawm cov hlau nto blasted ntxuav rau Sa2.5 (ISO8501-1).
Raws li lub tsho tiv no:Epoxy topcoat, Polyurethane, Fluorocarbon, Polysiloxane ... thiab lwm yam
Ntim & Cia
Ntim:puag 24kg, kho tus neeg sawv cev 4kg
Flash point:≥25 ℃ (sib tov)
Cia:Yuav tsum khaws cia raws li tsoom fwv hauv zos cov cai.Qhov chaw cia khoom yuav tsum qhuav, txias, zoo-ventilated thiab deb ntawm tshav kub thiab hluav taws.Lub thawv ntim khoom yuav tsum kaw kom nruj.
Lub neej txee:1 xyoo nyob rau hauv zoo cia tej yam kev mob los ntawm lub sij hawm ntawm ntau lawm.