Ib tug ob feem, siab solids, zinc phosphate epoxy primer thiab lub tsev lub tsho
Taw qhia
Ob lub ntsiab lus, cov khoom siab, zinc phosphate epoxy primer muaj li ntawm epoxy resin, zinc phosphate anti-xeb xim, hnyav, tus neeg sawv cev pabcuam thiab polyamide curing agent.
Nta
• Epoxy primer los yog tsim lub tsho tiv thaiv txheej txheej
• Zoo heev corrosion kuj nyob rau hauv atmospheric raug
• Kho ntawm qhov kub thiab txias mus rau -5 ° C (23 ° F)
• Max.tshaj txheej txheej tsis txwv
• Ceev curing hauv steel fabrication
• Kev siv dav dav
Pom zoo siv
Multi-purpose epoxy primer los yog nruab nrab xim rau steel qauv thiab galvanized hlau nyob rau hauv ntau yam atmospheric ib puag ncig.
Haum rau cov hlau tshiab lossis kho lub hom phiaj.
Cov lus qhia siv
Muaj feem xyuam rau substrate thiab nto kho:
Hlau: blasting ntxuav rau Sa2.5 (ISO8501-1), blasting profile Rz35μm ~ 75μm (ISO8503-1)
Siv tau thiab kho:
ambient kub yuav tsum yog los ntawm rho tawm 5 ℃ mus rau 38 ℃, tus txheeb ze cov av noo yuav tsum tsis txhob ntau tshaj 85%.
Substrate kub thaum lub sij hawm thov thiab kho yuav tsum yog 3 ℃ saum toj dew point.
lauj kaub lub neej
| 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 5 hnu. | 4 hnu. | 2 hnu. | 1.5h ib |
Txoj kev thov
Airless spray / cua txau
Txhuam thiab cov menyuam txheej tsuas yog pom zoo rau lub tsho stripe, me me txheej txheej lossis kov.
Daim ntawv thov Parameters
| Txoj kev thov | Chav tsev | Airless tsuag | Cua tsuag | Txhuam / Roller |
| Nozzle lub cev | mm | 0.43 ib～0.53 ib | 1.8～2.2 | —— |
| Nozzle siab | kg / cm2 | 150～200 | 3～4 | —— |
| Nyias | % | 0～10 | 10～20 | 5～10 |
Qhuav & Curing
| Substrate surfacetemperature | 5 ℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| Nto-qhuav | 4 hnu | 2 hnu | 1 hnu | 30 feeb |
| Los ntawm qhuav | 24 teev | 16 hnu | 12 hnu | 8 hnu |
| Overcoating Interval | 20 hnu | 16 hnu | 12 hnu | 8 hnu |
| Overcoating mob | Ua ntej siv lub tsho tiv no, qhov saum npoo yuav tsum huv, qhuav thiab tsis muaj zinc ntsev thiab kuab paug. | |||
Preceding & Consequent txheej
Lub tsho ua ntej:Ferrous hlau, kub-dip, thermal txau nrog kev kho saum npoo ntawm ISO-Sa2½ lossis St3.Pom zoo khw primer, zinc nplua nuj primer, epoxy primer ....
Raws li lub tsho tiv no:Epoxy, polyurethane, fluorocarbon ... thiab lwm yam.
Tsis sib xws nrog alkyd xim.
Ntim & Cia
Pob loj:puag 25kg, curing agent 2.5kg
Flashpoint:≥25 ℃ (sib tov)
Cia:Yuav tsum khaws cia raws li tsoom fwv hauv zos cov cai.Qhov chaw cia khoom yuav tsum qhuav, txias, zoo-ventilated thiab deb ntawm tshav kub thiab hluav taws.Lub thawv yuav tsum kaw kom nruj.